Consulting RFPs

Our 5 recommended practices to Avoid the Most Common Mistakes in Managing The Tail Spend

When you manage a budget, you tend to focus on the main expenses and sometimes ignore the smallest ones. And one in a while, you decide to go through your bank account, and you realize that when you add all the small expenses, the number is significant. This part of your expenses is your tail spend.

Our 5 recommended practices to Avoid the Most Common Mistakes in Managing The Tail Spend

The concept applies to your personal finances as much as to your consulting spend. It is the lowest portion of your spend (usually the last 20%), with smaller expenses scattered over a large number of suppliers.

“Beware of small expenses; a small leak can sink a great ship. “- Benjamin Franklin

And just like in your bank account, it is often not actively managed, even though it might still have an impact on your company’s performance.

Many client organizations give carte blanche to the business lines to hire consultants under a certain price threshold. This organization allows them to maintain some flexibility and reactivity in the consulting sourcing process. The downside, however, is that they tend to overlook these small consulting projects. But if you consolidate the spend at the organization level, it can add up to 25% of the overall Consulting Spend.

With the constant pressure on cost reductions and sustainable savings, even your CFO might take an interest in this line of expense.

Mismanagement of the Tail Spend, independently of the category, usually involves the following elements:

  • A scattered supplier base
  • Decentralized purchasing behaviors where customers are buying on their own, and procurement is almost uninvolved.
  • A minimal supplier Qualification
  • No or minimal performance Evaluations
  • Limited or no category management

Consulting is no exception to that. However, contrary to other indirect categories, the absence of comparable elements and the projects’ diversity combined with the importance of interpersonal relationships, can make it challenging to optimize and control.


When you launch a project, you can always hope that the consultant will understand your needs. Or you can write down the reasons why you start a project and what results you expect. Writing an RFP is not easy.

1. Consolidate Your Supplier Base with Caution-

One of the levers used to manage the spend is to consolidate the number of suppliers. Some companies have applied this methodology at the Category level. Suppliers have to be qualified for a given category, and the number of suppliers per category limited.

What starts out well can end up with a sound failure if you don’t consider the specificity of the Consulting category. If your sub-categories are not granular enough, you might end up with a handful of large one-stop shops. Price increase mechanically, erasing the savings made by the cleaning-up of the Tail Spend.

2. Effectively Manage the Variety of Projects –

To help you organize and manage the various projects, it’s best to sort them out into 5 categories:

  • One-time projects.

One-time projects are the core of your Tail Spend. They are usually small projects with a clear scope and little likeliness of sequel. (Ex: diagnosis or workshop facilitation)

  • Duplicate projects.

Several business units or departments can contract small or mid-sized projects with similar scopes and methodologies. They can be performed by the same or different consultancies.

  • Recurring projects.

Recurring projects are, most of the time, medium-sized projects designed with a repeat model. (Ex: pulse survey, voice of the customer, benchmarking, coaching)

  • Never-ending sequels.

You have certainly already seen one of these large projects designed in small chunks to fly under the radar. (Ex: one diagnosis per plant, any project reaching phase 4 and more)

  • Externalized workforce.

Sometimes managers use consultants to bypass too stringent HR rules or compensate for lack of internal expertise punctually.

3. Successfully Tackle the Tail Spend

To efficiently clean-up your Tail Spend, here are a few pointers:

  • Gather data on previous projects.

When facing the Tail Spend, the main challenge for most companies is to clearly identify the projects in the tail and cluster them into manageable sub-categories. If your organization is decentralized, you will need to get the support of the different parts of the organization to make sure that you have “clean data.” If you haven’t performed a spend analysis, maybe now is an excellent time to launch it.

  • Assess the performance of the providers.

Interview the project sponsors and leaders to identify high- and low-performers.

  • Regroup what you can.

Recurring and duplicate projects are good candidates for strategic management and should not be treated as the tail. How about a frame contract on coaching or a cross-business-unit RFP for excellence programs or digital transformation?

  • Develop your knowledge of the local Consulting market.

An excellent way to keep control of the tail without spending too much time on the management is to have at hand a list of additional providers. By exploring the local Consulting market, you will be able to identify potential suppliers and develop relationships. That will allow you to be reactive when one of your business lines wants to launch a one-time project on a given sub-category.

  • Fine-tune the rules for the tail projects.

To maintain your tail reasonable and make sure you are not building up another false tail, you need to set up workflows with the right agile check and balance and chase the false tail.

  • Use vendor management systems.

Use best-in-class systems to manage the one-off supplementary workforce. Automate the process to find, procure, and manage external talent in full compliance with your policies. You could use many other levers, but the above selection should probably give you a good 80/20.

4. How to Kickstart a New Tail Spend Project –

Below we have listed a few proven steps you can take.

  • Evaluate the size of the prize

First compulsory stop on your journey: evaluate the potential savings and improvements to expect. We have stressed many times the importance of creating value. You need to make sure that there is more to gain with the project than what you are spending. It is the right moment to start gathering data about the different projects to build a solid overview of your Consulting Spend. Depending on your Procurement practices’ maturity, you can expect between 5% to 40% savings on your tail Spend.

Once you know what to expect from the project, you can start implementing it.

  • Get the buy-in of key managers

One thing is sure – if your managers don’t believe in your project, it will never happen. You need to develop a sense of urgency, or in other words, demonstrate why it is essential to launch and implement the project now.

Develop a compelling story to tell your key managers and convince them. What is the reason for this change? The size of the prize can be an excellent starting point. Usually, consulting projects are paid on OPEX, and Executives have a lot of pressure to decrease their expenses. Saving 10% on your Consulting bills can help them reach their annual objectives. Leverage meetings with your top leaders to explain that small streams make big rivers. The efforts from all of them may seem insignificant taken separately, but altogether they are worth the effort.

  • Design the battleplan and confirm the stakes

Like any large project, you will need to define how you will proceed. It means having a project team, governance, and a clear work plan.

Also, start analyzing in detail the consulting spend and the past performance of your providers.

You can now refine the stakes lever by lever. Some of the projects that you led in the previous years were not strategic or redundant. You can probably take most of that part of the spend out of the equation. Grouping projects and negotiating on larger volumes can allow you to secure 10 to 30% of the costs.

  • Identify and involve the most impacted Executives

Some of your Executives will be directly impacted by the project, in particular, those who use Consulting regularly. Through your Tail Spend analysis, you will be able to identify the individuals or departments spending a lot on small projects. You can apply the same principles as the tail: what part of your executives spend 80% of your tail Spend? These Executives are the ones you want to work with.

When you have identified the most impacted Executives, take the time to listen to them to understand why they are buying Consulting Services in small bulks. There could be many good reasons why they would work that way. Think broader than procurement itself. The roots can be in strict HR policies, local management decisions, regional culture, etc.

  • Formalize the case for change and the communication plan

Take a step back. You have created a sense of urgency in your top management team, defined your implementation plan, and worked with the most impacted Executives to design the right solutions.

You now need to organize your findings in a well-built case for change to minimize resistance to change and make sure you capture the most value from your tail Spend projects.

5. Start small, go big, auto-finance –

Most successful companies start small. Of course, you want to adopt a medium-long term mindset to make the savings (and the change) sustainable. But modest quick gains can ease the way, help convince the last irreducibles, and capture enough savings to have a self-paid project.

Hélène Laffitte
Co-founder & CEO at Consulting Quest
Hélène is the author of Smart Consulting Sourcing, a step by step guide to getting the best ROI from your Consuting. You can follow @helenelaffitte on Twitter.

Hélène Laffitte is the CEO of Consulting Quest, a Global Performance-Driven Consulting Platform and author of “Smart Consulting Sourcing”, a step by step guide to getting the best ROI from your consulting. With a blend of experience in Procurement and Consulting, Hélène is passionate about helping Companies create more value through Consulting.

Join our newsletter

Consulting sourcing tips

Podcast | What is consulting?

Podcast | What is consulting?

Consulting is often defined as giving expert advice to other professionals. True, but I think it is a bit simplistic…

Consulting Procurement or Procurement Consulting?

Consulting Procurement or Procurement Consulting?

Type Consulting Procurement in your browser and look at the results. What do you find? A list of consulting companies that offer their services to help improve your company’s purchasing and/or sourcing capabilities. But is it the same thing as Consulting Procurement?

Previous Weeks’ issues

Choose the best next step for you

Buy the Book

Talk to us

We are always open to a discussion. Just book a 30-min virtual coffee with us and let’s get the conversation started
CEO and Co-Founder at | Author\'s website

Hélène Laffitte is the CEO of Consulting Quest, a Global Performance-Driven Consulting Platform and author of “Smart Consulting Sourcing”, a step by step guide to getting the best ROI from your consulting. With a blend of experience in Procurement and Consulting, Hélène is passionate about helping Companies create more value through Consulting.